Laptop Rubber Feet Strips for DELL XPS 7390 9305 9370 9380

for DELL XPS 7390 P82G003 ,9305 9370 9380 Laptop Bottom Case Nonskid Silicone Bumper Rubber Compatible models： FOR Dell XPS 9370 rubber feet FOR Dell XPS 9380 P82G002 laptop bottom case rubber feet strips FOR Dell XPS 7390 P82G003 laptop bottom case feet FOR Dell XPS 9305 P82G004 Please refer to the following steps for installation 1: Before installation, please pry off the plastic tripod of the bottom shell (the plastic cover covered by the original rubber can be disassembled from the bottom shell) There are several plastic welding points inside that can be flattened and pushed out with a screwdriver 2: The groove needs to be cleaned thoroughly 3: Simply stick it in place The advantages of installing rubber foot pads 1、Allow you to raise your viewing angle and improve your typing experience, thus relieving the pain on your neck and back. 2、 By elevating the laptop, add bottom air circulation reducing laptop temperature to achieve the purpose of heat dissipation rubber laptop feet. 3、Strong anti slip performance，prevent sliding on smooth surfaces, like glass, plastic, ceramic, wood, etc computer feet cushion. Questions you have about rubber foot pad Question 1: Do I need to clean or prepare before pasting? Answer 1:Before pasting, you must clean the location where you need to paste and clean the old foot pads completely to make them dry before installing them, so that the new rubber foot pad can be firmly adhered and not easy to fall off. Question 2: Do they adhere well to the surface of the laptop? Answer 2: They can stick well to the surface of the laptop, when installing press hard for a period of time, so that the rubber foot pad and the computer surface are completely bonded, the adhesion is very strong, can also be used to increase the firmness of the solid adhesive. Question 3: How durable are they? Answer 3: The durability of the rubber foot pad is very good, they are not easy to be damaged, and they are wear-resistant. Question 4: Are they easy to apply and do not produce air bubbles? Answer 4: It's easy to install, you can install it directly by tearing off the sticky side, and press hard to make the foot pads fit perfectly with the computer surface, no air bubbles will be generated. Question 5: Are they easy to clean and maintain? Answer 5: The rubber foot pads are easy to clean and maintain, wipe with a clean paper towel for cleanliness Question 6: Is their installation process complicated? Answer 6: The installation process is very simple, tear the side of the rubber foot pad and paste them to install successfully. Question 7: Do they provide enough surface grip? Answer 7: It is very non-slip and has a good surface grip. Question 8: Will the adhesive strength weaken over time? Answer 8: I would recommend that you clean the area with alcohol to remove all residue and adhesive from the previous footbed, leaving clean metal. Install the new foot pads and it will be very strong and less likely to come off. This way the adhesive strength will not weaken over time. Of course you can clean it without alcohol.

• For DELL XPS 7390 P82G003 , 9305 P82G004 ,9370, 9380 P82G002 Laptop Bottom Case Nonskid Silicone Bumper Rubber 【Carefully check if your laptop is XPS 7390 2-in1 P103G001, if so, it is not compatible】
• 【Thick foot pad size 】23.1cm * 0.7cm * 0.3cm 【 Thin foot pad size】 23.1cm * 0.7cm * 0.1cm
• 【You will get】2pcs Rubber Non-Slip Strips Laptop Rubber Feet (Off white)
• This Product Are Tested Before Shipping.
• Easy to use: There is adhesive on one side of the rubber strip,The adhesive on the Bumper Feet Strips of the release liner ensures that they are firmly attached to the bottom base of the laptop.Strong slip resistance ，excellent adhesion, and not easy to peel off.The effect is very good! You can also use a quick-drying glue to reinforce its contact with the notebook.
• Before you install the Rubber feet, please clean mounting location and dry them to prevent Rubber feet coming off. Rubber feet elevate the laptop slightly for better heat dissipation and are non-slip.